Surface Preparation
Primer / Primer Filler
Body filler
Fillers
Fill In/ FillClean® cans
Top Coats
Clear Coats and Spot Blender
Accessories
Cleaning and polishing.
Determine color shade.
Cover vehicle / machine sand damaged area with P320 / P400.
Sand the edge zone manually with P600.
Clean with 1K Solvent Wash (3680090).
Prime with 2K epoxy primer filler.
IR drying approx. 25 min.
Apply 1K Guide Coat 3680100 to aid with next sanding phase.
Manual sanding with P600.
Check for any imperfections.
Clean with Solvent Wash 3680090 + dust cloth.
Apply original color shade (2-3 thin spray passes depending on opacity).
Flash-off time between spraying 3-5 min.
Apply 1K or 2K SprayMax Clear (please refer to the technical data sheets).
Optional: IR drying (see tech sheet)
Sand and polish if needed.
Rich in active ingredients for the efficient removal of silicone, grease, oil, wax, dirt, tar, and soot. This high quality product has excellent ...
Universal 2K epoxy primer filler for all problematic surfaces; for example, metal, non-ferrous metal, galvanized sheet steel, or anodized aluminum.
This improves the efficiency of the sanding process and the paint result.
For the filling of the specific color tone of solvent 1K base paints in the brands and qualities offered by the paint manufacturers (as follows).
The ...
2K Clear Coat available in two gloss levels (Matte & Satin). Developed for the Small Damage Repair Process or complete painting of mounting parts.
