Surface preparation
Primers / fillers
Body filler
Fillers
Fill In/ FillClean® cans
Top coats
Clear coats and spot blender
Accessories
Clean the damaged area and sand with P400.
Clean with silicone remover.
Carefully mask for AC filler application.
Apply 1K AC Filler in 2-3 thin coats.
Flash off until matt.
Sanding by hand with P600.
Clean with Aqua Silicone Remover.
Prepare for basecoat by cleaning with a duster.
Apply the previously mixed basecoat colour.
Forced flash off.
Always flash off another 1-2 spray coats in between.
After flash-off, apply 1K clear lacquer.
Apply a spray thinner to the edge zones, then optionally IR dry.
After drying for approx. 20 minutes, the result is like new.
Rich in active ingredients, mild cleaning agent for the ef cient removal of silicone, grease, oil, wax, dirt, tar, and soot. This high quality ...
Water-borne cleaning agent, rich in active ingredients and with a reduced solvent content. Ideal for the removal of silicone, grease, oil, wax, dirt, ...
Acrylic filler with good stability, faster drying and excellent dry-sanding properties. Ideal for spot repairs. Can be used on steel, galvanised ...
For the colour tone specific filling with water-borne based 1K paints in the brand and quality of the paint manufacturers named below. The result is a ...
1K clear coat for quick coating and longterm sealing of repair paint jobs and new paint jobs. Due to the good elasticity of the coating, the ...
Blend thinner is a special product for homogenous paint transitions in the blending area of 1K/2K clear coats as well as of 2K topcoats with ...
