Mastic

UVA Finishing Glaze Aqua

UVA Finishing Glaze Aqua is a universal 1K UV curable refinish putty used for automotive refinishing. This product is perfect for filling pinholes. The unique properties allow a complete and fast curing process in less than 60 seconds, depending on thickness applied. The high filling properties guarantee a superior quality result compared to any other product. Available in 200g containers.

❗️ Requires UV-A equipment for curing. Best Option: UV-A Mercury Lamp UV-LED Recommendation: UV-A LED lamp with 395nm wave length. UV LED alternative: UV-A LED with 365nm wave length will cure the clear depending on intensity and time of exposure.

Plus d'informations

Avantages

Easy application
Very fast curing process in less than 60 seconds
Suitable for use on most metal and plastic surfaces
Smooth, uniform and high-quality surface finish
Excellent flexibility
Requires only light sanding
Can be sanded immediately after curing (no cooling time required)
Less dust/powder from sanding
Environmentally-friendly: 100% styrene free and low volatile organic compounds (VOC)
Non-flammable product

Informations sur les articles & fiches techniques

Numéro d'article	couleur	taille	Fiche technique	Fiche de sécurité
3680802	aqua	200g / 7.0 oz	FT (3680802, FR)	FDS (3680802, FR)

Conseils d'application

'Dry' sanding' (machine)

Clean the cured surface with degreaser and wipe with a clean cloth. Sand with P 120 to P 320 grit paper.

Drying

Cure the putty by using a UV curing lamp with a minimum of 7mW / cm2. No Flash OFF time for a thicker layer, add 1.5mm of putty on the first cured layer.

Storage stability

One Year Use and store this product in a well-ventilated area below 35°C. Keep container tightly closed. Store away from direct sunlight or UV light.